(866)223-5699
(866)223-5699
Hidden moisture is behind many expensive building problems, from rotted framing and failing floors to mold growth. A moisture meter helps you find it before the damage spreads. FLIR moisture meters are popular with inspectors, contractors, and restoration professionals because many models combine standard moisture measurement with a built-in thermal camera.
This guide explains how FLIR moisture meters work, the difference between pin, pinless, and thermal-guided measurement, how the main FLIR models compare, and how to choose and use one for accurate results.

A moisture meter measures how much water is in a material such as wood, drywall, plaster, or concrete. FLIR, now part of Teledyne FLIR, makes a range of moisture meters, from simple pin-type pens to complete building inspection systems. Depending on the model, a FLIR meter may include:
Two pins are pressed into the material, and the meter measures the electrical resistance between them. Wetter material conducts more easily, so the meter converts the result into a moisture content reading. Pin readings depend on choosing the correct material setting, and they leave small holes.
A pinless sensor is placed flat against the surface and uses an electromagnetic field to sense moisture below it. On the FLIR MR160 and MR277, pinless readings reach up to 0.75 in. (19 mm) deep. Pinless mode is fast and leaves no marks, but it gives a relative reading. It is best used to compare suspect areas against a known dry area of the same material.
Infrared Guided Measurement (IGM) uses a built-in thermal camera to show surface temperature differences. Damp areas often look cooler because evaporating water cools the surface, so IGM can point you toward places worth measuring.
A thermal camera does not see moisture directly or through walls. Cool spots can also come from drafts, missing insulation, or HVAC airflow. That is why FLIR pairs the camera with pin and pinless sensors: the image shows where to look, and the moisture sensor confirms what is actually there.

FLIR's moisture meter range covers basic spot checks through full building inspections. The table summarizes key differences between the main models, based on FLIR product information.
| Model | Type | Thermal camera | Hygrometer | Typical users |
|---|---|---|---|---|
| MR40 | Pin moisture pen with flashlight | No | No | Homeowners, quick spot checks |
| MR55 / MR59 | Pin meter (MR55) or ball-probe meter (MR59), both with Bluetooth | No | No | Contractors, flooring and restoration work |
| MR160 | Pin and pinless with IGM | 80 × 60 | No | Home inspectors, renovation, roofing |
| MR176 | Pin and pinless with IGM | 80 × 60 | Yes (replaceable thermo-hygrometer) | HVAC/R, building management, pest management |
| MR265 | Pin and pinless with MSX | 160 × 120 | No | Building inspection, roofing, HVAC/R |
| MR277 | Pin and pinless with MSX and IGM | 160 × 120 | Yes (built in) | Building inspection, restoration, commercial facilities |
Higher thermal resolution shows more detail, which helps when scanning large walls or ceilings from a distance. MSX adds edge detail from a visual camera, making it easier to see exactly where a cool spot sits.

Start with the work you do most often:
To learn more about humidity and dew point, see our professional hygrometer buyer's guide and our guide to wet bulb temperature and psychrometers.
Several FLIR models combine pin and pinless moisture measurement with a built-in thermal camera. The thermal image helps you find suspect areas quickly, and the moisture sensors confirm what is actually there.
Yes. Pinless mode scans below the surface without leaving holes. Use pin mode when you need a moisture content reading, since it requires small holes.
No. A thermal camera shows surface temperature. Moisture often makes a surface cooler, so it can appear as a cool pattern, but other causes look similar. Always confirm with a moisture reading.
Pin readings measure electrical resistance between two pins and give a moisture content value for the selected material. Pinless readings sense moisture below the surface and give a relative value, best used to compare wet and dry areas.
Yes. Simpler models such as the MR40 suit occasional home checks. Imaging models such as the MR160 and MR277 are aimed at professionals who inspect buildings regularly.
Whether you inspect homes, manage commercial buildings, or restore water-damaged properties, the right meter helps you find moisture faster and document it clearly. See the FLIR MR277 building inspection system, or browse our Teledyne FLIR collection for thermal imaging and inspection tools, including the Extech RH101 hygro-thermometer.
Leave a comment